HTE Labs was founded in 1983 in Silicon Valley and is headquartered in Santa Clara, California. Over the years, HTE Labs has actively participated in process developments addressing the needs of microelectronic industry. Member of IEEE, American Vacuum Society and MEMS, HTE Labs is participating most actively in the following microelectronic areas: APPLIED THIN FILM COMPONENTS AND TECHNOLOGIES BIOTECHNOLOGY AND MEDICAL APPLICATIONS NANOTECHNOLOGY SMART SENSOR TECHNOLOGIES (PRESSURE, TEMPERATURE, GAS DETECTORS) OPTOELECTRONIC TECHNOLOGIES AND COMPONENTS HIGH RELIABILITY DISCRETE AND INTEGRATED CIRCUITS TECHNOLOGY DEVELOPMENT RF MEMS HTE Labs highly skilled, disciplined and experienced personnel are driven by the desire of providing the highest quality in wafer processing and in customer service. HTE Labs has built in Quality control mechanisms in every step of fabrication process. The wafer Fab operation is 100% paper less. All specifications and procedures are being accessed by operators at one of the intelligent terminals located throughout wafer Fab. HTE Labs processes are ISO compliant, pending certification in a very near future. HTE Labs is ideal strategic partner for customers involved in production or Research and Development of Advanced Technologies.
We offer lifetime guarantees. Our goal is to be responsible for our products for the duration of their lives. We are forerunners in the firm establishment of semiconductor equipment parts and related technologies. It is our mission to improve and spread technology in manufacturing semiconductor parts and related techniques as one of the leading companies in the field in Korea. We are maintaining a healthy work environment at Jusung Engineering. We want to grow and prosper as a progressive company where we focus on the needs of our employees.
Founded in 1995, Techni-Met, Inc. is a high value added manufacturer of precision coated materials, specializing in the vacuum deposition of inorganic materials (such as precious, refractory, non-magnetic metals, alloys, and ceramics) onto flexible polymeric films. This type of vacuum deposition process is called sputtering. Techni-Met is a dynamic company with a capable staff in manufacturing, R&D, and quality control. We create working solutions for our customer's sputter deposition needs. Our high technology production line, developmental line, and class 10,000-cleanroom inspection facility, allow us to produce wide web, single or multi-layer sputtered coatings of inorganic films onto various substrates. Our inspection and converting processes both at the start, and end of the production process, enables us to provide our customers with the highest quality in sputtered materials. Through our associations with Vitex and Gould, we are able to further our deposition and coating capabilities. By combining these resources, Techni-Met is able to venture into organic coating deposition and heighten our quality standards for use in display applications. Our facilities located in Windsor, CT currently have one of the largest production capacities in the industry. This enables us to work with international corporations as well as small businesses on projects of all sizes, allowing our customers to develop new and innovative products for many different markets. Due to our flexibility, our talented R&D department is able to tailor projects to our customers needs. Technological advancements in the coating industry, and a continued commitment to total customer service are key components of the Techni-Met future plan.
GlobiTech responded to this changing silicon market by building the semiconductor industry's first foundry dedicated to manufacturing leading-edge CMOS epitaxial wafers. Located in Sherman, Texas, GlobiTech offers competitive 150-mm, 200-mm and 300-mm epi solutions to both silicon wafer manufacturers and semiconductor fabs.
Torr International, Inc. is in its 14th year of business. It started primarily as a vacuum technology company, and in the last six years it has established itself as a THIN FILM EQUIPMENT SPECIALIST. The current range of products include Standard Table Top low-priced Magnetron Sputtering systems for diverse applications, from specimen preparation for SEMs to R & D with metal, dielectric and polymer films to Custom-built multi-target sophisticated systems for special applications. We also manufacture Thermal and E-Beam Evaporation systems to suit customers' needs and specialize in Etching systems with different configurations for corrosive and standard applications. We serve a worldwide market in the areas of Thin Films Deposition and Etching as well as high vacuum technology. We believe in understanding the customers' requirements fully, before offering a solution. Torr International, Inc. acquired Plasma Sciences,Inc. of Virginia USA and routinely produce and market their Models LVC-76, CrC-150, as well as repair and service their old systems. We also supply all the accessories needed for Thin Film Deposition work. Do not hesitate to contact us for any of your needs.
Founded in 1986, KDF is a leading supplier of both new and remanufactured physical vapor deposition batch inline sputtering tools for the mainstream silicon, emerging materials and flat panel display markets. KDF services an installed base of over 3,300 systems in the field - over half of the semiconductor fabs in the world use a KDF system in wafer processing. The worldwide market for batch in-line sputter and etch systems is worth approximately $200-$250 million per year and KDF is currently ranked number four in the market for thin film physical vapor deposition equipment. Committed to delivering the most advanced and reliable batch in-line sputtering systems at the industry's lowest cost of ownership, KDF's tools cover a wide variety of process requirements and can be customized to meet the customer's needs. KDF vacuum coating systems are used in the production of devices in a variety of markets, including semiconductors, laser diodes, photo masks, telecommunications networks, wireless circuits, sensors, opto-electronics, medical devices, MEMS, MOEMS, flat panel display and gallium arsenide (GaAs), high density interconnect and radio frequency power devices. In 1998, KDF acquired all Materials Research Corporation (MRC) batch, in-line sputter, and etch system product lines from Tokyo Electron Limited (TEL). Utilizing the production-proven technology of the MRC systems, KDF's in-line sputtering tools were re-engineered to meet the versatility and high-throughput needs of emerging technologies across multiple markets. KDF services and supports the MRC product line by supplying replacement parts, sputter targets and field service to the systems worldwide with its own employees and factory trained representatives. All resources supporting the sale of the batch systems, including key support personnel, were transferred from TEL to KDF at the time of the acquisition. KDF has over 600 man years experience working on MRC/KDF batch equipment.
Sundew Technologies is an innovative supplier of thin film deposition equipment and services, providing high productivity cost-effective atomic layer deposition (ALD) equipment. Sundew's breakthrough ALD technology enables device manufacturers to significantly improve their device performance, extend product lifetime, and design novel applications that were previously not viable. As device manufacturing complexity keeps increasing, the need to deposit high quality films on complex three-dimensional substrates and surfaces intensifies, causing an escalation in associated Cost of Ownership. Manufacturers in a large number of industries are seeking cost-effective equipment that can lay down uniform, conformal and low-defects films with atomic-level, reproducible and robust control. Sundew's innovative equipment combines the exceptional properties of ALD with un-paralleled throughput and maintainability at the lowest CoO. Sundew continuously innovates to improve equipment safety, cost and performance. With its true disruptive technology and strong IP protection, the company's mission is to spearhead a paradigm shift in the field of thin film deposition, delivering cost effective ALD tools to improve existing applications and enable new ones in a large number of industries. Opportunities for Sundew's cost-effective ALD span the semiconductor, magnetic data storage, MEMS, optical telecommunications, flat panel displays, medical, solar and nanotechnology industries, to name just a few. Located at the heart of the Denver/Boulder Technology Corridor in Broomfield, CO., Sundew Technologies is a privately held company founded in 2001.
ASI/Silica Machinery, LLC was formed in 1997 with a mission to provide high quality and cost effective capital equipment and process technology to manufacturers of optical fiber and fused silica preforms. Our Outside Vapor Deposition (OVD) core and cladding products are state of the art, yet based on proven equipment and technology that have been perfected by the key scientists and engineers of the company over the course of the last 13 years. They enable makers of optical fiber preforms to lower their cost of manufacturing when compared to other commercially available alternatives. Today, ASI/Silica Machinery is the leading commercial provider of OVD deposition and sintering process technology and products to the optical fiber manufacturer market. We have installed our products at leading optical fiber production sites throughout the world. ASI/Silica Machinery has an aggressive development program to develop next generation equipment to help its customers continually improve both their cost of manufacturing and their product quality. Our corporate, development, and manufacturing facilities are located in Los Angeles, California, USA. We also have branch offices in Sydney, Australia, and in Wales, United Kingdom.
PVD Products, Inc. designs and manufactures unique thin film deposition systems and components for material scientists and process engineers. Our equipment utilizes only reputable vacuum components that require minimal maintenance and provide long life. In addition to our existing line of deposition products, in-house SEM, and thin film services, we can provide custom systems tailored to your own specific needs.
The POM Group, Inc. is a full service provider of services and technologies for rapid product development. POM specializes in the design and build of mission critical tooling systems used to cast, stamp, or injection mold high volume products. POM's mission is to assist our clients in bringing new products to market with the shortest lead-time and lowest possible cost. We are a minority owned and operated business, certified by the Michigan Minority Business Development Council (MMBDC) .
Since 1991, VPT has specialized in providing cost effective vacuum equipment and process solutions to customers' requirements. VPT has supported a wide range of markets and coating applications worldwide and has built a reputation as a world-class supplier of Optical Coating Systems and Custom Vacuum Equipment. VPT offers its customers decades of experience designing and constructing vacuum systems. VPT's ability to use this experience while collaborating and listening to its customers provides the depth, flexibility and responsiveness customer's want. This is why companies like II-VI, Corning, Eastman Kodak, Newport, University of Rochester, Metavac and many others repeatedly rely on VPT to support their programs.
4Wave is the industry leader in providing advanced ion beam based processing techniques, and equipment for thin film applications. Supplying proven processes and equipment, 4Wave enables its customer to achieve their thin film deposition and milling requirements. To assist our customers, 4Wave also provides consulting, design and prototyping along with thin film coating services. With installations throughout North America, Europe and Asia, 4Wave continues to lead the industry in providing advanced deposition, etching solutions and technologies. Product lines range from entry level batch tools for R&D and pilot production to fully automated cluster tools designed for the stringent requirements of 24/7 semiconductor production. Founded in 2000 by the senior technical and management staff of Commonwealth Scientific Corporation, our team has extensive knowledge and experience in developing, designing and delivering both thin film processes and high vacuum equipment. Our (7,500 sq-ft) facility located minutes away from Dulles International Airport in Sterling, Virginia, includes manufacturing, lab clean rooms and a full compliment of metrology equipment. 4Wave is dedicated to technological innovation, uncompromising integrity and complete focus on providing maximum value to our customers.
NanoGram Corporation is a developer and licensor of core process technology enabling the manufacture of unique nanoscale compositions for optical, electronic, defense, display and energy applications and products. The company has developed extensive intellectual property that is expanding the boundaries of nanomaterials technologies by enabling the development and manufacturing of new generations of materials, devices, components and applications.
Unaxis is a globally active leading provider of production systems, components and services for selected growth markets, focused on information technology. Unaxis' activities comprise the Information Technology segment (semiconductors, flat-panel displays, data storage and optical components), Surface Technology, and Components and Special Systems (vacuum technology and space travel engineering). Unaxis employs around 6,500 people and achieved sales of CHF 1,490 million in 2002. Corporate headquarters are in Pfäffikon (SZ) Switzerland, with production facilities in Europe, North America and Asia, plus sales organizations in 22 countries.
Privacy Policy | Terms and Conditions | Do Not Sell My Personal Information | Websites Directory
Copyright © 2022 kwtbox.com. All Rights Reserved. US Business Directory