We are dedicated to the needs of the European Industry. We have been introducing advanced test and metrology tools to Europe for over twenty years. 3D x-ray tomography - John P Kummer group was established in Switzerland in 1975 as a specialist distributor of equipment for the semiconductor industry. As the company responsible for the European introduction of Tencor Products, the group grew quickly and added first a German Office in 1978, followed by French and United Kingdom branches in 1984 and 1989 respectively. Our objective is simple: we aim to take a product, sometimes at an early stage in its development, and find customers for it. For more mature products the principle is the same; we introduce them at the level appropriate in the European Market. We offer support in marketing, public relations, exhibitions and after sales. Our Responsibility to Manufacturers. We are responsible members of the European industry. Our relationship with our customers are defined by the fact that even though our dealings with a particular supplier may end when a product reaches a certain level of market penetration, our responsibility to the customer does not. We never take our customers for granted. Using our long established relationships within the worldwide Industry we bring the newest and most technologically advanced products to the European Microelectronics Community. Sometimes we work with small startups; in other cases we work with suppliers who have been in existence as long as we have. In any case we have a simple and clear objective - to match the capabilities of these products with the needs of our customer base.
RAVE will continue to focus on customer satisfaction with its products, as the leading indicator of leadership in its markets. RAVE will design, engineer, manufacture and support its products with the technological innovations and requisite reliability to meet our customers changing business environment. (Semiconductor Industry Association (SIA) and Key Customer Road map demands and timelines.) RAVE will manage its operations to the most productive level of performance possible, consistent with meeting its stated mission. The company will involve its suppliers in its planning and forecasting, to maximize entire supply chain performance. RAVE will continue to hold business integrity, employee satisfaction and shareholder value as the key foundation of its business environment.
NexTech Solutions, Inc. delivers advanced metrology and automation solutions to the global semiconductor and flat panel display (FPD) industries. NexTech produces advanced AOI systems for high performance inspection of FPD substrates to a rapidly expanding, multi-billion dollar market that has been growing at a double-digit rate year-to-year. The FPD AOI products include the NexTStar, the FPDStar. These advanced AOI systems enjoy a technology advantage over conventional AOI systems, allowing NexTech to compete aggressively in this market. NexTech has several patents pending which are related to these systems in advanced illumination, derived color imaging, sub-micron defect pattern inspection and superior TACT performance. NexTech's advanced inspection technology dovetails well into the need for semiconductor reticle inspection. NexTech also produces the ORION, a fully automated reticle inspection system which provides macro particle inspection prior to stepper usage. NexTech has delivered this and other equipment solutions to customers among the largest semiconductor companies in the industry. NexTech's mission is to create greater shareholder value through advanced technology development of products targeted at large, fast-growing markets. The company is headquartered in Austin, Texas, with facilities in San Mateo, Calif.
SITE Services, Inc. is a manufacturer of automated wafer coating equipment for the global semiconductor industry. Founded in 1980, the company designs, manufactures and markets innovative equipment used in the semiconductor photolithography process. In 25 years of business SITE has evolved into a designer and manufacturer of track products in two areas: Tractrixand SpinBall compact spin tracks ESVG (Enhanced SVG) track upgrades and systems. In 1998, the first Tractrix (originally called the Millennium 2000) Spin Track was sold. SITE incorporated the best of what we know and do into this completely new track design. The Tractrix tool is small in footprint (19" x 66.5" typical) yet large in capability. Capable of processing wafers ranging in size from 2" to 200mm, it features robotic wafer handling, PC-based graphical user programming and touch screen control. The SpinBall is a manual version of the Tractrix model and handles wafers, squares and pieces from 2" to 300mm. It features automated recipe control and dispense, has single or multiple spin modules and is perfect for R&D, university or pilot line production. SITE's Enhanced SVG systems are completely improved (enhanced), affordable tracks of the venerable 81- and 86-style SVG design. SITE has upgraded the performance of these workhorses with its advanced spin and bake modules as well as other improvements. SITE modules yield better-than-original process uniformity. For less critical processes, SITE's Enhanced SVG tools are an economical alternative. Given the popularity of the SVG track, beginning in 1989, SITE expanded its offerings to address the demand for repair services and module upgrades for 81- and 86-series tools. These SITE Enhanced SVG products include improved spin cups, drain systems, hot plates, sensor systems and other enhancements for these belted-carriage systems. In fact, SITE can (and does) build complete the 86-series tools from scratch. Today you can still find SITE in the heart of the Silicon Valley. The company maintains its headquarters and factory in Santa Clara, California. SITE products and services are sold directly and through a network of representatives in North America, Europe and the Far East.
MIDAS Vision Systems Incorporated is the world's leading supplier of automated optical inspection (AOI) process modules for yield management in multi layer co-fired ceramic (MLCC) substrate production. At the core of MIDAS AOI systems is a patented optical system coupled with sophisticated software algorithms designed for unsurpassed speed, accuracy, and reliability. Designed for both in-line 100% inspection and end-of-line applications, the company's products are deployed by leading MLCC producers to build capacity and ensure manufacturing quality in low- and high-temperature co-fired ceramic (LTCC/HTCC) and thick film multi layer ceramic packages used in Bluetooth wireless communications, supercomputers, mobile RF communications, and automotive electronics. In addition to its corporate headquarters in Wrentham, MA, USA, MIDAS Vision Systems also maintains regional sales and service offices located throughout North America, Japan, and Europe.
SCP Global Technologies is committed to being the worldwide leading supplier of cost-effective surface preparation technology, systems and services. We recognize the only way we can accomplish this goal is to work closely with our customers to address their needs of today while changing to meet their demands of tomorrow. Only by focusing on our customers' success can we continue to grow. Please use this form to help us address your needs.
Robotic Vision Systems, Inc. (RVSI) (RVSI.OB) has the most comprehensive line of machine vision systems available today. Headquartered in Nashua, New Hampshire, with offices worldwide, RVSI is the world leader in vision-based semiconductor inspection and Data Matrix-based unit-level traceability. Using leading-edge technology, RVSI joins vision-enabled process equipment, high- performance optics, lighting, and advanced hardware and software to assure product quality, identify and track parts, control manufacturing processes, and ultimately enhance profits for companies worldwide. Serving the semiconductor, electronics, aerospace, automotive, pharmaceutical and packaging industries, RVSI holds more than 100 patents in a broad range of technologies.
http://telecom.press-world.com
Bookham Technology (LSE: BHM; NASDAQ: BKHM) is a global leader in the design, manufacture and marketing of optical and RF components, modules and subsystems. Bookham's disruptive technologies and broad product range allow it to deliver an extensive range of cost effective optical functionality and solutions to customers, which offer higher performance, lower cost and provide greater subsystems capability to meet their customers' needs. The company's optical and RF components, modules and subsystems are used in various applications and industries, including telecommunications, data communications, aerospace, industrial and military. In 2002, Bookham acquired the optical components businesses from Nortel Networks and Marconi. In 2003, the company acquired Ignis Optics, Inc. and the business of Cierra Photonics Inc. In March 2004, the company completed the acquisition of New Focus, Inc. The company, whose securities are traded on NASDAQ and the London Stock Exchange, is headquartered in the UK, with manufacturing facilities in the UK, US, Canada, and Switzerland; offices in the UK, US, France, Italy, and China; and employs approximately 1750 people worldwide.
Semitool, Inc. (Semitool) designs, manufactures, installs and services equipment for use in the fabrication of semiconductor devices. The Company’s products are focused on the wet chemical process steps in integrated circuit (IC) manufacturing and include systems for wafer surface preparation and electrochemical deposition (ECD) applications. Its surface preparation systems are designed for Front End of Line (FEOL), Back End of Line (BEOL) and wafer level packaging of ICs processes. Semitool’s single wafer FEOL surface preparation systems are used for photoresist stripping, post etch and pre-diffusion cleans. Its BEOL surface preparation systems are used for polymer removal and packaging applications. Its ECD systems are used to plate copper and other metals, which are used for the IC’s internal wiring, or interconnect; to plate solder and lead free solder bumps for wafer level packaging applications, and to plate other metals for various semiconductor and related applications. (Source: 10-K)
DALSA Corporation designs, develops, manufactures and markets digital imaging products and solutions. The Company’s products and services include image sensor components, electronic digital cameras, vision processors, image processing software and semiconductor wafer foundry services for use in micro electro-mechanical systems (MEMS), high-voltage semiconductors, image sensors and mixed-signal complementary metal-oxide semiconductor (CMOS) chips. The Company has two business segments: Digital Imaging Products and Solutions (Digital Imaging) and Semiconductor Products and Services (Semiconductor Business). Digital Imaging segment designs, develops and manufactures imaging products and solutions. Semiconductor Business manufactures semiconductor wafers and components for the electronics industry. On April 17, 2008, the Company acquired 23.3% interest in Rad-icon Imaging Corp. (Source: ARS)
Privacy Policy | Terms and Conditions | Do Not Sell My Personal Information | Websites Directory
Copyright © 2022 kwtbox.com. All Rights Reserved. US Business Directory